Now You Know Essential Parts which are Used in Weft Insertion Motion of Loom

Essential Parts which are Used in Weft Insertion Motion of Loom

Bhavdip Paldiya
Dept. of Textile Technology
Sarvajanik College of Engineering & Technology, Surat, India
Cell: +91 9662020909
Email: bhavdipk9009@gmail.com

Weft Insertion Motion
The movement of the inserted yarn in weft passage is a complex motion. It is called weft insertion motion. It is not a positively controlled process.

Here We Explain the Some Following Parts which are used in Weft Insertion Motion:

Plate spring tenser
LH sensor
Pre-winder
Electromagnetic pin
Balloon sensor
Balloon breaker
ABS/WBS
Tandem nozzle
Main nozzle
Electrical cutter
Sub-nozzle
H1 feeler
H2 feller

1. Plate spring tenser:

Thread a weft through the tenser. (Be sure to thread a weft between the leaf springs of the tenser.)

Plate spring tenser

Here,

Plate Spring Tenser
Plate Spring
Adjusting Nut

2. LH sensor:

This LH sensor detects the presence or absence of a weft yarn at the preset timing. If it detects a weft yarn, the machine continues running, if no weft yarn, the machines stop.

LH sensor

3. Pre-winder:

Adjust the drums height 1& 2 at an equal distance from the horizontal centerline assumed between tandem nozzles. Drums head 1& 2So that its center line passes the center of the inlet of tandem nozzle. Drums should be tilted down 14 degree from a horizontal position.

Right to left position the electric drum unit so that the distance from balloon cover to tandem nozzle comes to 50 mm. The distance from electromagnetic pin to tandem nozzle should be approx 400-420 mm.

Adjust drum head 1& 2 to the front or rear so that its center line passes the center of tandem nozzle & main nozzle. Adjust the height of chesses tensor and eyelet front to rear positioning. By using push button, feed a weft yarn into the drum. Yarn feeding air is supplied from main tank.

Name Of Components:

Winding Sensor
Electromagnetic Pin
Measuring Band
Measuring Bands
Cover
Motor
Inlet Piece
Winding Arm
Push Button
Adjust Bracket

Pre-winder

4. Electromagnetic pin:

This pin measures the length of a weft yarn for one pick. Make the clearance between this pin & measuring band 0.5 to 0.8 mm.

Electromagnetic pin

5. Balloon Sensor :

This sensor detect the number of weft winding on measuring bands and is the first turn, second (n-1)th turns and nth turn. Adjust the clearance between the sensor and the measuring band to 0.5 to 1.2 mm.

Measuring length = Drawing in width + Waste selvedge in length.

6. Balloon breaker

The balloon breaker makes the filling balloon small to reduce release tension and filling insertion resistance. It is required to operate the loom stably with weak filling.

Balloon breaker

It controls the balloon size and pressure of the main nozzle. It guides the weft thread,.

7. Weft Break System (WBS) :

WBS Weft Brake System prevents broken picks and slack picks.

Weft Break System

Braking force is applied to the filling just before the insertion is completed. This reduces the velocity in order to greatly reduce peak tension. Decrease of broken picks improves quality and operation. Loom speed can be increased.

***Prevents many common problems such as:

Broken Pick
Slack Pick
Intertwining
Long & Short Pick
High-Twisted And Elastic Yarn Returning

8. Tandem Nozzle:

Set the crank angle at 90-degree . Set the dimension at 21 mm. Angle at about 10 degree so that tip and of the accelerating tube of tandem nozzle comes to the center line of main nozzle. Up down positioning at left adjust tandem nozzle & so that their center lines passes the center of drum head 1&2 and of thread guides respectively according to the following procedure.

Tandem Nozzle

Adjust distance between the top of tandem plate & the top of the tandem nozzle one bracket to 165mm & second bracket to 60mm. Adjust the inclination of tandem nozzle & so that the distance between their tips becomes 48mm.

9. Main Nozzle:

The right to left positioning of main nozzle that adjust slay so that distance from its left end to the left most dent of reed comes to 215 mm. Adjust main nozzle so that distance from the tips of their acceleration tubes to the left most dent comes to approx 11 mm.

Main Nozzle

The standard clearance between thread guide & lock nut is approx 3.5 mm. clean sides of thread guide & side of main nozzle body with a clean cloth or an air blower. Insert thread guide straight into main nozzle body until its locks become engaged.

10. Electrical Cutter:
The Electrical Cutter Solves The Difficulty Of Fine Adjustment.

The cutter timing of the main nozzle can be set on the i-board. (Easy adjustment)
The tension in filling cutting can be adjusted according to the filling type even during operation.
Because the cutter is inoperative during APR operation, it is unnecessary for the defective pick to escape from the cutting area. (Easy adjustment for blowing-up, increase of success ratio of the APR)

11. Sub Nozzle:

Sub nozzle is placed in front of reed. Air is jetted in order to transfer the inserted weft through main nozzle over the entire machine width. 4-sub valve is use in machine.

Sub nozzle

Each sub valve has 4-sub nozzle join to it. Connect an air pipe to sub nozzles, then tighten the nut fully by hand. Rotate fixing nut by 360 degree with a spanner. The height & angle of sub nozzle may be changed upon the texture type to be woven.

***Arrangement of sub nozzle:

Distance between H1& H2 feller =125mm.
Distance from the left most warp to the first sub nozzle =30mm.
Distance between sub nozzle in the central zone of fabric =60mm.
Distance from the right most warp to the last sub nozzle = (30-60) mm.
Distance between last sub nozzle & H1 feeler = (25-30) mm.

Arrangement of sub nozzle

12. H1 feeler.:

H1 feeler detects the presence or absence of a weft yarn at the preset timing. If it detects a weft yarn,the machine continues running, if no weft yarn, the machines stop.

H1 feeler

13. H2 feeler:

H2 feeler detects the presence or absence of weft yarn at the preset timing. If it detects no weft yarn, the machine continues running, if it detects any weft yarn reaching the H2 due to a broken or blown-off weft trouble the machine stop.