Now You Know 10 Points System for Fabric Inspection in Garment Industry

10 Points System for Fabric Inspection in Garment Industry

Mayedul Islam
Merchandiser at Fashion Xpress Buying House.
Badda, Dhaka, Bangladesh.
Email: mayedul.islam66@gmail.com

10 Points System
For production of high quality garments, need high quality piece goods. It is an universal truth. When a sewing factory receives fabric from the mill, it is difficult to conduct a full 100% inspection of the fabric. So then minimum 10% inspection of all piece goods prior to spreading the fabric. There are several methods of fabric inspection in garments industry. Ten Points system is one of them.

Fabric Inspection in Garment Industry

The 10 point method is a point per fault system, which gives a measurable guide to quality grading per roll. In 1955s “Ten Points” piece goods evaluation was adapted by the Textile Distributors and National Federation of Textiles. The system assigns penalty points to each defect as per following guideline.

Warp Defects

 

    Size of defects →→→→→→→→→→→→→→Penalty

• Up to 1 inch →→→→→→→→→→→→→1 Point
• 1 to 5 inches →→→→→→→→→→→→→3 Points
• 5 to 10 inches →→→→→→→→→→→→5 Points
• 10 to 36 inches →→→→→→→→→→→10 Points

Filling/Weft Defects

     Size of defects →→→→→→→→→→→→→Penalty

• Up to 1 inch →→→→→→→→→→→→ 1 Point
• 1 to 5 inches →→→→→→→→→→→→3 Points
• 5 inches to half the width →→→→→→5 Points
• Half to Full width →→→→→→→→→→10 Points

A maximum 10 Points is charged for one linear yard of fabric.

Working Procedures

• Under the 10 Points system, a piece is graded as “First”, if the total penalty points do not exceed the total yardage of the piece. 

• In case of a fabric wider than 50 inches; “First” quality is considered if the total defect points do not exceed the total yardage of the fabric. 

• A piece is graded as “Second” if the total penalty points exceed the total yardage of the piece.

You can also like:
Apparel / Garment Quality Inspection System | Four Point System

Sumber http://textilelearner.blogspot.com

Share this post