Now You Know Drafting Details of Men’s Vest / Waistcoat
Tuesday 22 January 2019
Edit
Drafting Details of Men’s Vest / Waistcoat
R.S.BALAKUMAR
M.A.(SOCIOLOGY ), M.L.M.(Labour Management), Pursuing MBA(EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India
Cell: +91-9283182955
Email: rsbalakumar1953@gmail.com
R.S.BALAKUMAR
M.A.(SOCIOLOGY ), M.L.M.(Labour Management), Pursuing MBA(EXECUTIVE) in (FASHION-TECH), MISTE., Chennai, India
Cell: +91-9283182955
Email: rsbalakumar1953@gmail.com
Men’s Vest / Waistcoat:
Vest a type of body garments from ancient days this garment is used in cold region. In cold region they use to wear two or three garments over the body to control the coolness and to maintain the warmness of the body. In fashion days this garment is also familiar as fashion garments.
 |
| Men's waistcoat |
Now days this style is adapted for all seasons the style of vest is varied from length and loose of garments, it is classified under length as above waist level, up to the waist level, below waist level under loose as fitted vest, semifitted vest bolero vest, The vest without sleeve will have a deep armhole. Under we presented the construction and working method for some type of vest.
Measurements Required:
16 ¾ “ to waist 25”front length 36” chest 33”waist
 |
| Drafting details of vest |
1-0= scye depth is 1/4th chest
2-0= 16 ¾” waist length
3-0= 1/4th distance of 1 to 0
4-2= ½”
5-4= 1 ¾” square up from 9 to locate 10 and 11
11-10= ½”; draw the back shoulder seam from 11 to 7, as shown
12-8= 1/8th chest
13-12= 1 ½”
13-14= 1/12th chest +1/2”
15-1=1/2 chest
16-15= 1 ½”
17-16= 1”. Square up 14 to 18. Draw line from 18-10. On this line make 19 from 18, the same as from 7-11 on the back, less 1/4”
20-19= ½”
21-13=1 ½”
21-22= ¾”. Draw a line from 20-22 and locate 23 half way along this line.
24-12= ½” and is ¼” belowthe chest line.
W-10= 2 ½”. Shape the armhole from 20 through 22[hollowing half an inch at 23] and from 11-24, hollowing half an inch at W square down from 15-25 and from 24 to B
A from 4= ¾”; measure from A-26, half inch waist measure plus 1 ½”.
The amount registered between 25 &26 will be taken at the side seams at point B
27 from B = ¼”
28 from 27= 2 ½” shape the backside seam from 24 through 27 to 28 as shown.
29-27 is the same as the amount between 25 &26
30 from 29= 2 ¼”. Shape the fore part side seam from 24 through 29 to 30
31-18= 1/12th chest.
32 is located by applying ½ collar size plus 1 ¾”
Round neck section from 7-0 and 18-32
33-32= 1 ¾” for the position of stand.
34 from 18 is the full length, less the width of back neck, plus 1” for seams and making up.
35-34= ¾” shape the front and bottom edges as shown
M from 1 = ½” less than half the distance between 1 &9; square down to N. mark out a dart, suppressing 5/8” between R&S, leaving ¼” gap at N.
The collar:
1-0= neck/2
2 is middle of 1-0
1-3= 1”
4-3= 1 ½”
5-4= 3/8”
6-0= 1 ½”
3-5= 1 ½”
You may also like:
- Drafting and Cutting Procedures of the Women’s Saree Blouse
- Drafting Procedures of Ladies Kurti
- Drafting Procedures of a Ladies Nightgown
- Drafting Procedures of a Ghagra Choli
- Drafting Procedures of Short Tops
- Drafting Procedure of Women’s Shirt
- Drafting Procedures of A-Line Frock
- Drafting Procedures of Princess Petticoat / Chemise
- Drafting Procedures of Salwar
- Drafting Procedures of Single Pleated Trousers
- Drafting Procedures of Midi Dress