Yaa How To Command Textile Shrinkage, Gsm As Well As Dia Inward Compacting Machine?

How to Control Fabric Shrinkage, GSM in addition to Dia inwards Compacting Machine?

Rofiquzzaman Raju
Fabric Technologist,
B.J.Group, Mawna, Gazipur

Email: rtextile.finance@gmail.com

Factor Consideration inwards Textile Finishing:

Compactor is a textile compacting machine.

Compactor Machine

Shrinkage control:

• Shrinkage is controlled yesteryear proper over feeding.
• To employ less or to a greater extent than over feed speed fabrics cut back along to length in addition to increase along to width. Maximum lxx – 75% shrinkage is controlled yesteryear using it.

GSM Control:

• GSM is too controlled yesteryear applying proper over feeding speed.
• If over feed is to a greater extent than in addition to hence GSM is too more.
• If Over feed speed is less in addition to hence GSM is too is less.
• If Dia is to a greater extent than in addition to hence GSM of the stuff volition less.
• If Dia is less in addition to hence the GSM of the stuff volition more.

N.B: If GSM of the stuff is OK in addition to hence shrinkage is too OK.

Dia Control:

• Dia is controlled yesteryear dia controlling meter scale.
• If whatsoever fault, GSM of the stuff is reduced in addition to hence to increase the GSM of the stuff dia volition convey to live reduced (2 – 3) inch.
• If Over feed speed is to a greater extent than thenDia of the stuff volition live more.
• If Over feed speed is less thenDia of the stuff volition live less.
• If length is to a greater extent than in addition to hence width of the stuff is reduced.
• If length is less in addition to hence width of the stuff is more.

N.B: Fabric speed is controlled on the stuff dia. Here, Dia less or More fully depends on yarn count in addition to buyer order. Dia is done less or to a greater extent than yesteryear using expander rod.

Over feed:

Fabric	Dia(Increase)
Single jersey	1.5 – two ) inch +.
Rib fabric	2 – 2.5 inch +.
Interlock	3 – 3.5 inch +.
Pique	3 – 3.5 inch +.

• GSM Control.
• Shrinkage Control.
• Dia Control.

Depends on Dia:

Fabric	Over Feed Speed(m/min)
Lycra	30 – 35
1×1 Rib	28 – 30
Single jersey	26 – 27
2×2 Lycra rib	23 – 24
Lacoste	23 – 24
Normal over feed speed	22/23/24/25

Share this post