Yaa Functions Of Shop Region Inward Garment Industry

Working Procedure of the Store Department inward Garment Industry
Mohammad Sajjadul Karim Bhuiyan
BGMEA University of Fashion as well as Technology
Email: sajjadulkarim7@gmail.com

The textile as well as accessories stores subdivision is centralized inward clothe manufacture as well as all the textile as well as accessories comes to this unit of measurement get-go from the supplier as well as audited hither as well as kept until it is distributed to other units. For an export oriented as well as mass production of garment industry. it is essential to maintain a well-organized & good equipped inventory system. The principal responsibleness of this subdivision is to shop all the raw stuff necessary to orbit garments. This subdivision is sub divided into 3 sections. Store keeper follows a rigid as well as appropriate working procedure.

Figure 1- Store for Accessories

Figure two - Store for Fabrics

Machine Used inward Store:

• Fabric Inspection Machine
• Heat wearable label cutting machine

Figure 3 - Fabric Inspector Inspecting Fabrics

Figure 4 - Heat wearable label cutting machine

Resister & Report purpose inward Store:

• Needle Change register
• Different types needle residuum register
• In House textile Inspection written report ( 4 Point organization )
• Fabric Shade written report
• Accessories Inspection Report
• Shrinkage test Report
• Fabric have packing List
• Button lawsuit register

Needle Issued for unlike Machine from Store

Table - List of Different types of Needle Issued from Store

Machine Type	Needle Type	Needle Size
Plain Machine	DB×1	11
Button hole & 2N Machine	DP×5	11,16,14
BTN stitch as well as Bartech Machine	DP-7	14
Chain Stitch Machine	TV-7	11,14,16
Feed Off The Arm machine	TV-64	11,14,16
Overclock Machine	DC-1	9,11,14,16

Fabric Inspection:
The get-go pace to live carried out when received from the supplier is to inspect the fabric. In the textile inspection subdivision four indicate system is been used for bales, rolls& Piece Goods inspection.

Inspection Procedure:

1. As presently every bit the textile received, the textile inspection subdivision inspects the fabric.
2. From the supplier the textile is received inward the shape of Rolls.
3. According to the club placed, they house 5% extra club to the supplier to run into the requirement.
4. Fabric received inward the shape of Takas may live of length commonly 100 meters, exactly it tin live 45 or 65 meters also.
5. Every textile has to live inspected 100% incase 15% amongst the consent of concerned merchandiser approvals.
6. Then the Takas or Rolls are inspected inward amount width on the tabular array or machine nether the skilful low-cal for defects analyses.
7. They are next Four Point System, inward which amount 100 meters of textile is inspected and, if the points allotted for 100 meters are Less than (<) xl points is accepted More than (>) xl points is Rejected Check the textile length & width & compare against the length declared past times the supplier.
8. Fabric width 1½’’ to 2’’ tolerance of specified width is accepted.
9. For every lot / every textile club move past times away along 1mts of textile for lab testing & for lineament measure reference.
10. Inspection reports are produced. Copies of the written report are presented to concerned merchandiser & department.

Store Keeping System:

• Unload fabrics
• Inventory inward warehouse.
• Fabrics inspection
• Recording inward register volume as well as Excel sheet.
• Updated information set inward Bin Card (It is updated information bill of fare for bin or rack,

Sewing Line Accessories exceptional stored inward the store

• Yarn
• Thin yarn: 40/2, l /2,60/2
• Thick yarn: 20/2, 20/3
• Button
• Interlining
• Main Label
• Sub labels
• Size Label
• Fit label
• Care Label: It contains the attention construction. Different types of attention label are given below.

• Washing Symbol
• Bleaching symbol
• Ironing Symbol
• Dry cleaning Symbol
• Drying Symbol

Finishing Line Accessories exceptional stored inward the store:

• Neck board
• Hangtag amongst sticker
• Tissue (when folding shirts)
• Poly

Process Flow of Store Section

Figure five - Working Flow Chart of Store Section

Product Receive: Here account is collect past times Merchandiser, without account it is non possible brand the inventory, because at that spot is a listing of Goods In invoice.

Inventory: After Comparing account amongst received goods, the goods are placed inward inventory.

Inspection of Goods: Generally 10% goods are inspected, if constitute defects to a greater extent than that tolerance, the lot volition live declared every bit refuse as well as inform supplier for replace. Trims as well as accessories volition live inspected 10% of amount quantity. if constitute defects to a greater extent than than tolerance , as well as then declared every bit reject.

Shade segregation: Here pieces of fabrics from all whorl possess got to cutting as well as made a blanket to segregate shade.

Shrinkage Test: from the textile roll, 10% whorl volition live selected for shrinkage examination . Piece of textile cutting from each whorl at 50cm ×50cm as well as sends for shrinkage test. Shrinkage examination repost as well as then ship to Pattern Section.

Issuing Product: Store ever issues production for cutting as well as sewing subdivision every bit per pre-requisition from that department.

Sustain balance: Store ever keeps the sustain tape afterwards the issuing production inward cutting as well as sewing section.

You tin too like:

1. Inventory System inward Textile Industry
2. Working Process of Fabric Store Department inward Apparel Industry
3. Role of Merchandiser inward Apparel Industry

Share this post