Yaa Drafting Procedures Of Ladies Kurti

Drafting Procedures of Ladies Kurti

R.S. Balakumar
M.A.(SOCIOLOGY ), M.L.M.(Labour Management), Pursuing MBA (EXECUTIVE) inward (FASHION-TECH), MISTE.,
Chennai, Republic of Republic of India
Cell: +91-9283182955
Email: rsbalakumar1953@gmail.com

Introduction:
Ladies kurti is expect similar equally kameez. But kurti’s length is shorter thence kameez. It is a really comfortable dress. It is used inward all flavor but particularly used inward summertime for comfortness. Kurti is normally worn past times college going girls inward India, Bangladesh, Sri Lanka.

Ladies kurti

Drafting Procedures of Ladies Kurti:

Measurements Required: Full length 30” N.W length xvi ½” Shoulder width 14” mid Bust 36”. Waist 30”. Hip cervix 15” long sleeve length 23” girth 11”.

Pattern parts Required:- Front cutting 1 on fold, dorsum cutting 1on fold, sleeve cut2.

Material suggested:- Cotton, poplin, silk, crape, synthetic, chiffon crape too satin.

Material Required: - 2.50 mtr.Cloth width 42”.

Drafting Details of Front Part:

1-2= Full length + 1 ¼”.
1-3= Arm depth, 1/6th Bust +1”.
1-4= N.W. length + ½”
5 is the midpoint of iii to 1measure. Front cervix sort should drawn.
6-1= ½ shoulder width + ½”
7-6= Draw a line.
8-3= 1/4th Bust +1”.
9-6= shoulder’s gradient ¾”
10-1= 1/6th Bust +1”.
11-10= Same equally v to 1 measure.
12-11= 1 ½” at 45o.
8-13-14= 1 ½” Draw a line.
15-13= ¾” Waist shape.
16-2= 1/3rd Hip +1 ½”.
17-16=3/4” Bottom shape.
18-7= 1” equally per draft.
19 is the mid-point of half dozen to 7.
19-20= ½” inward arm hole bend to last describe
Waist middle dart to the drawn, 8”x ¾”
Neck opened upward front end v ½” (21 to 22)

Kurti's front end part

Drafting Details of Back Part:

After cutting the front end portion, position on unopen to other newspaper too describe the dorsum part equally per instructions given below.

23-1= 1 ½” dorsum cervix drop.
24-1= Save equally front end 1 to 10measure.
25-24= 1 ½” equally per draft, build the dorsum cervix shape.
26-27-28= armhole bend is to last drawn away from the front end arm bend portion.
Back waist dart 8” x ¾” middle of four to fifteen equally per draft.