Yaa Character Command Together With Inspection Procedure Of Marking Making

Quality Control too Inspection Process of Marker Making

Noor Ahmed Raaz
B. Sc inward Textile Engineer (CU)
Specialized inward Apparel Manufacturing
Merchandiser, A.M.C.S Textile Ltd (AEPZ)
Email: raju.uttara105@gmail.com

Quality command inward marking making:
Marker is a sparse newspaper which contains all the necessary designing pieces for all sizes for a item trend of garments. It is made but earlier cutting too its role is to minimize the wastages of fabric. In illustration of marker making character is real of import factor. Though character is a relative term.

The objectives of character command inward marking making tin live summarized as:

1. To ensure the markers are made to a size ratio that gives the required character too quantity per lodge past times reducing the wastage of fabrics.
2. To ensure no garment business office is missed inward the marking too the marking is of comparable length too width of the cloth existence laid.
3. To banking company check notch or drill grade
4. Fabric width must live higher than marking width
5. Fabric length must live higher than marking length
6. Matching of greenish business
7. Check designing size too dimension
8. Matching of banking company check too stripe taking into consideration
9. Considering garments production computer programme
10. Cutting tabular array length consideration
11. Pattern direction consideration

Cutting section starts alongside the receipt of slice goods too ends alongside the completion of the bundles of cutting parts create for sewing. The grooming for cutting is real of import prior to the cutting operation. Accurate cutting simplifies the sewing too pressing operation. Cutting of fabrics or trims to size, where possible, eliminates considerable measuring, matching, shaping too trimming inward the sewing room. Proper punching of holes too notching is of import for accurately locating parts.

Marker making

Quality inspection physical care for for markers:

• Locations alongside manual marking making system: In these locations, the markers should live inspected past times the Quality Control Department earlier the cloth is laid. This volition larn out sufficient fourth dimension to brand whatever correction to the marking that is necessary. 

• Locations alongside figurer marking making (CAD) system: In location that uses the CAD system, the marking data needs to live cross-checked past times an operator other than 1 who complied the marker, earlier the marking is printed. This is to ensure that no operator mistake has occurred. The marking tin too hence live re-inspected past times the Quality Control Department later on it has been placed on the lay of cloth prior to cutting.

Marker Inspection:

SL	Check points	Allowance
1	Ensure the right patterns bring been used.	No allowance
2	Ensure the size ratio is correct	No allowance
3	Ensure the right sizes bring been drawn onto the marking every bit per the size ratio	No allowance
4	Ensure all the garment parts bring been drawn onto the marker	No allowance
5	Ensure the patterns are facing the right direction inward illustration of marking making modes.	No allowance
6	Ensure the patterns bring been placed onto the marking inward such a means every bit to attain the highest cloth utilization.	Stripes too Checks 80% & Solid color 95%
7	Ensure the marking is of the right widths, comparable to the cloth hence that the cloth is non wasted. If the marking is also small-scale or also broad too hence incomplete garment parts are cut.	Zero to one-half inch
8	Ensure the marking is of right length	Zero to 1 inch
9	Ensure splicing marks are correctly drawn on the marker.	No allowance
10	Ensure all notches too drill holes bring been drawn on the marker.	No allowance
11	Ensure no unauthorized alterations bring been made to the marker.	No allowance

Share this post