Now You Know Sewing Machine Needles: Types, Parts, Sizes and Applications
Saturday 19 May 2018
Edit
Sewing Machine Needle and Its Purposes:
Needle is the central feature of any sewing machine. The manner in which fabric is pierced by the needle during stitching has a direct impact on the strength of the seam as well as garment appearance.
The purposes of the sewing needles are to:
The different parts of a sewing needle are shown in Figure-1.
Every parts of sewing machine needle are described below:
Shank: It is the top portion of the needle, which positions inside the needle bar. It could be designed as cylindrical or have a flat side, based on the method of holding it on to the needle bar. It is the principal support of the entire needle and is larger in diameter than the remaining part of the needle to give the strength.
Shoulder: It is the part in-between the shank and the blade, with the blade forming the longest portion of the needle up to the needle eye.
Blade: It undergoes an enormous amount of friction from the fabric through which the needle passes. In case of needles specifically designed for high-speed sewing, the shoulder is normally extended into the upper part of the blade to give a thicker cross section. This arrangement of reinforced blade strengthens the needle and produces the enlarged hole in the fabric while the needle is at its lowest point, thus minimising the friction between it and the material. On the other hand, the blade could be designed as a tapered one, reducing its diameter gradually from shank to tip to minimise the friction.
Long groove: It gives a shielding channel for the sewing thread while it is carried down into the fabric for stitch formation thus reducing the abrasion and friction with the fabric.
Short groove: It is located on the reverse side of the long groove, that is, towards the hook or looper; it extends slightly above and below the needle eye. It assists in the formation of the needle thread loop.
Eye: It is the hole or opening in the sewing needle, lengthened through the blade along the long and short grooves on the needle. The profile of inside part of the eye at the top is vital in reducing sewing thread damage and in producing a good loop formation.
Scarf: The scarf otherwise known as clearance cut is a nook across the whole face of the needle immediately above the needle eye. Its objective is to facilitate closer setting of the bobbin hook or looper to the needle so that the needle thread loop could be entered more easily by the point of the hook or looper.
Point: It is tapering portion of the needle created to give a better penetration of the needle on various kinds of fabric. It should be properly selected to prevent damage of the fabric to be sewn.
Tip: It is the ultimate end of the point, which combines with the point in defining the penetration performance of the needle.
Special Needles:
Several over-edge and safety stitch sewing machines utilize curved needles instead of straight needles. These needles are costly though the life of the needle is lesser compared to straight needles. However, the sewing machines utilising curved needles (Figure-2a) could achieve higher speeds than by using straight needles. Blind stitching machines also utilise needles that are curved, but the purpose here is to avoid penetration right through the fabric. Sewing machines (pick stitching machine) that imitate hand stitch (class 209) utilise a double-pointed sewing needle with an eye in the middle (Figure-2b), through which is threaded the short length of thread with which this machine sews.
Identification of Sewing Needle:
Three parameters are generally used for the identification of sewing needles such as system, point and size.
System:
It describes the elements of a needle to suit the sewing machine type. Based on the type of sewing machine and type of stitch, the needle is designed with variants in blade length, shank thickness, type of needle eye, etc. It is worthwhile to ensure with the sewing machine manufacturer for appropriateness of needle system to machine.
Needle Point:
A needle point is broadly categorized into two types:
Cutting point sewing needles have spiky tips like blades and a wide range of cross-sectional profiles such as rounded, triangular, square and lens exist. They are normally used to sew highly dense and non-fabric based materials. Five universal kinds of cutting point sewing needles are shown in Figure-3, along with their profile of incision produced when used in a machine with the commonest threading direction.
The narrow wedge point needle: It cuts the material at right angles (90°) to the seam direction and permits to go for a high stitch density (SPI) while leaving adequate material between the needle holes to retain seam strength of material. On soft leather material, stitch densities as high as 12 per centimetre are achievable. It is the most frequently utilised cutting point needle for stitching uppers in the shoe industry.
Cloth Point Needles:
These kinds of needles are used for sewing textile materials instead of the leather/sheet materials as in the case of cutting point needles. The points have a round cross section contrasting to the various cutting profiles of the cutting point needles and the tip at the end of the point can vary in profile to suit the particular material being sewn.
Slim set point (SPI): It is generally used for sewing denser woven fabrics and aids in achieving a straighter stitch which could minimise seam pucker. Generally used for heavy woven fabrics, coated fabrics and topstitching of collars and cuffs.
Medium set point needle: It is the general purpose needle in no problem sewing situations. It is commonly used for sewing a range of woven fabrics and in many circumstances could be used for knitted fabrics also.
Set cloth point (R): It is generally utilized for sewing standard fabrics with regular seams.
Acute set point: This kind of needle is used while sewing very dense fabrics like shirting fabric and interlining in collars and cuffs, where a straight line of stitching is required.
Heavy set point: These needles are used for sewing buttons as the button can be deflected to some extent into the correct position; thus, the needle can pass through the holes.
Light ball point (SES): It can be used for sewing lightweight knitted fabric and densely woven material.
Medium ball point (SUK): It is utilised for sewing denim fabrics of medium to coarser weight and knits.
Heavy ball point (SKF): It is utilised for sewing heavier woven elastic materials as well as coarser knits.
Special ball point (SKL): It could be utilised for sewing heavy knits and coarse elastics.
Needle Size:
The needle size is normally expressed in two ways. One of the basic methods of representation is by a metric number (Nm). This system represents the diameter of the needle blade in hundredths of a millimetre measured just above the scarf area. For example, a needle size of Nm 100 is 1.0 millimetre in diameter as shown in Figure-5. Another standard needle sizing method is the Singer system, otherwise called the American system, which uses a number that represents a size.
Needles are offered in a wide range of sizes and the selection of needle size is based on the combination of fabric and sewing thread which is to be sewn. If the selected sewing needle is too small for the sewing thread size, the thread will not fit well into the long groove of the needle and will suffer from extreme abrasion. The use of too fine a needle while sewing heavy plies of fabric could lead to the deflection of the needle, which could influence the stitch loop pick up and cause slipped stitches or even needle breakage. Use of a larger sewing needle for the particular sewing thread resulted in poor control of the loop formation which could lead to slipped stitches.
Application of Sewing Machine Needles:
General purpose needles:
The general purpose needles used in apparel manufacturing are given in Table-1.
Table-1: Application of General Purpose Needles
Specialty needles:
The specialty needles used in garment manufacturing are given in Table-2.
Table-2: Application of Specialty Needles
Surface Finishing of Sewing Needles:
Sewing needles are normally made from steel and during their final manufacturing stage they are polished, specifically in the needle eye area. They are then electroplated using chromium or nickel to provide resistance to mechanical wear, corrosion resistance and reduction of friction during sewing. One of the main requirements of the surface finishing of needles is it should not pick up any elements of synthetic fabric or thread which could melt due to excessive heat generation. By considering this aspect, the chromium-plated sewing needles are superior compared to nickel-plated needles.
You may also like:
Sumber http://textilelearner.blogspot.com
Needle is the central feature of any sewing machine. The manner in which fabric is pierced by the needle during stitching has a direct impact on the strength of the seam as well as garment appearance.
The purposes of the sewing needles are to:
- Make a hole in the fabric so that the sewing thread could pass through it to form a stitch without causing any damage to the fabric while doing so.
- To carry the needle thread through the fabric to form a loop. This is then taken up by the hook in a lockstitch machine or by means of the looper in chain stitch machines.
- Pass the needle thread through the loop created by the looper mechanism on a chain stitch machine.
The different parts of a sewing needle are shown in Figure-1.
 |
| Figure-1: Parts of a sewing machine needle. |
Shank: It is the top portion of the needle, which positions inside the needle bar. It could be designed as cylindrical or have a flat side, based on the method of holding it on to the needle bar. It is the principal support of the entire needle and is larger in diameter than the remaining part of the needle to give the strength.
Shoulder: It is the part in-between the shank and the blade, with the blade forming the longest portion of the needle up to the needle eye.
Blade: It undergoes an enormous amount of friction from the fabric through which the needle passes. In case of needles specifically designed for high-speed sewing, the shoulder is normally extended into the upper part of the blade to give a thicker cross section. This arrangement of reinforced blade strengthens the needle and produces the enlarged hole in the fabric while the needle is at its lowest point, thus minimising the friction between it and the material. On the other hand, the blade could be designed as a tapered one, reducing its diameter gradually from shank to tip to minimise the friction.
Long groove: It gives a shielding channel for the sewing thread while it is carried down into the fabric for stitch formation thus reducing the abrasion and friction with the fabric.
Short groove: It is located on the reverse side of the long groove, that is, towards the hook or looper; it extends slightly above and below the needle eye. It assists in the formation of the needle thread loop.
Eye: It is the hole or opening in the sewing needle, lengthened through the blade along the long and short grooves on the needle. The profile of inside part of the eye at the top is vital in reducing sewing thread damage and in producing a good loop formation.
Scarf: The scarf otherwise known as clearance cut is a nook across the whole face of the needle immediately above the needle eye. Its objective is to facilitate closer setting of the bobbin hook or looper to the needle so that the needle thread loop could be entered more easily by the point of the hook or looper.
Point: It is tapering portion of the needle created to give a better penetration of the needle on various kinds of fabric. It should be properly selected to prevent damage of the fabric to be sewn.
Tip: It is the ultimate end of the point, which combines with the point in defining the penetration performance of the needle.
Special Needles:
Several over-edge and safety stitch sewing machines utilize curved needles instead of straight needles. These needles are costly though the life of the needle is lesser compared to straight needles. However, the sewing machines utilising curved needles (Figure-2a) could achieve higher speeds than by using straight needles. Blind stitching machines also utilise needles that are curved, but the purpose here is to avoid penetration right through the fabric. Sewing machines (pick stitching machine) that imitate hand stitch (class 209) utilise a double-pointed sewing needle with an eye in the middle (Figure-2b), through which is threaded the short length of thread with which this machine sews.
 |
| Figure-2: Special needle shapes. (a) Blind stitch needle. (b) Pick stitch needle. |
Three parameters are generally used for the identification of sewing needles such as system, point and size.
System:
It describes the elements of a needle to suit the sewing machine type. Based on the type of sewing machine and type of stitch, the needle is designed with variants in blade length, shank thickness, type of needle eye, etc. It is worthwhile to ensure with the sewing machine manufacturer for appropriateness of needle system to machine.
Needle Point:
A needle point is broadly categorized into two types:
- Round point needle – set or cloth points
- Cutting or leather point needle
Cutting point sewing needles have spiky tips like blades and a wide range of cross-sectional profiles such as rounded, triangular, square and lens exist. They are normally used to sew highly dense and non-fabric based materials. Five universal kinds of cutting point sewing needles are shown in Figure-3, along with their profile of incision produced when used in a machine with the commonest threading direction.
 |
| Figure-3: Cutting point needles. |
- The narrow reverse point needle: It produces cut that lies 45° to the seam direction, and produces a seam where the thread is turned to the left on the surface of the material.
- The narrow cross point needle: It makes a cut along the line of the seam and necessitates a longer stitch length. Heavy decorative seams could be made where thicker sewing threads are used at lower stitch densities, that is, longer stitch length.
Cloth Point Needles:
These kinds of needles are used for sewing textile materials instead of the leather/sheet materials as in the case of cutting point needles. The points have a round cross section contrasting to the various cutting profiles of the cutting point needles and the tip at the end of the point can vary in profile to suit the particular material being sewn.
- The contour of the tip of the needle point which attains the deflection rather than penetration is a fine ball shape and the needle is called a light ball point needle which is utilised primarily for sewing knitted fabrics.
- The tip of the needle point which attains the penetration has the shape of a cone and is known as a set point needle which is utilised for sewing woven fabrics. Both ball and set point needles are available in a number of types, illustrated in Figure-4.
 |
| Figure-4: Types of cloth point needles. R: set cloth point, SPI: slim set point, SES: light ball point, SUK: medium ball point, SKF: heavy ball point, SKL: special ball point. |
Medium set point needle: It is the general purpose needle in no problem sewing situations. It is commonly used for sewing a range of woven fabrics and in many circumstances could be used for knitted fabrics also.
Set cloth point (R): It is generally utilized for sewing standard fabrics with regular seams.
Acute set point: This kind of needle is used while sewing very dense fabrics like shirting fabric and interlining in collars and cuffs, where a straight line of stitching is required.
Heavy set point: These needles are used for sewing buttons as the button can be deflected to some extent into the correct position; thus, the needle can pass through the holes.
Light ball point (SES): It can be used for sewing lightweight knitted fabric and densely woven material.
Medium ball point (SUK): It is utilised for sewing denim fabrics of medium to coarser weight and knits.
Heavy ball point (SKF): It is utilised for sewing heavier woven elastic materials as well as coarser knits.
Special ball point (SKL): It could be utilised for sewing heavy knits and coarse elastics.
Needle Size:
The needle size is normally expressed in two ways. One of the basic methods of representation is by a metric number (Nm). This system represents the diameter of the needle blade in hundredths of a millimetre measured just above the scarf area. For example, a needle size of Nm 100 is 1.0 millimetre in diameter as shown in Figure-5. Another standard needle sizing method is the Singer system, otherwise called the American system, which uses a number that represents a size.
 |
| Figure-5: Metric needle sizing. |
Application of Sewing Machine Needles:
General purpose needles:
The general purpose needles used in apparel manufacturing are given in Table-1.
Table-1: Application of General Purpose Needles
Needle | Description | Fabric | Sizes |
Ball-point | It has a medium tip, rounded compared to universal needle | Knits | 70/10 – 100/16 |
Sharp | It has a slim shaft and sharper needle point | Fine woven fabrics | 60/8 – 90/14 |
Universal | Needle point is marginally rounded; however, it is sharp enough to pierce woven fabrics | Woven and knitted fabrics | 60/8 – 120/19 |
The specialty needles used in garment manufacturing are given in Table-2.
Table-2: Application of Specialty Needles
Needle | Description | Fabric | Sizes |
Denim | It has a thicker and stronger shaft and a sharp needle point | Denim and heavy woven fabrics | 70/10 – 110/18 |
Leather | It has a wedge-shaped needle point | Leather and nonwoven fabrics | 80/12 – 110/18 |
Machine embroidery | It has a larger eye and a special scarf to protect the sewing thread | For embroidery | 70/10 – 90/14 |
Metallic | It has a larger eye than the embroidery needle, and a sharp point to avoid thread breakage | For metallic threads | 80/12 |
Quilting | It has a tapered as well as sharp needle point | Machine quilting | 75/11 and 90/14 |
Spring needle | It has a shaft surrounded by the wire coil, which acts as a presser foot | Quilting | |
Stretch needle | It has a deep scarf to avoid skipped stitches | Lightweight knitted fabrics | 75/11 and 90/14 |
Topstitch needle | It has an extra-large eye and a large groove | Topstitching | 80/12, 90/14 and 100/16 |
Twin needle | It is constructed with two needles attached to a single shaft | Double topstitching | 1.6/70 – 4.0/100 |
Triple needle | It is constructed with three needles attached to a single shaft | Triple topstitching | 2.5/80 and 3.0/80 |
Hemstitch needle | It has a widened shaft and produces a decorative hole in tightly woven fabrics | Decorative stitching | 100/16 and 120/19 |
Sewing needles are normally made from steel and during their final manufacturing stage they are polished, specifically in the needle eye area. They are then electroplated using chromium or nickel to provide resistance to mechanical wear, corrosion resistance and reduction of friction during sewing. One of the main requirements of the surface finishing of needles is it should not pick up any elements of synthetic fabric or thread which could melt due to excessive heat generation. By considering this aspect, the chromium-plated sewing needles are superior compared to nickel-plated needles.
You may also like:
- Important Points for Selection of Sewing Needle
- Functions of Different Components of a Needle
- Performance of Sewing Needles in Industrial Sewing Machines
- Different Parts of a Sewing Machine Needle
- Properties of Sewing Threads | Essential Properties Required for Sewing Threads
- Sewing Thread | Technical Applications of Sewing Threads
- Apparel Manufacturing Technology by T. Karthik, P. Ganesan, D. Gopalakrishnan
- Garment Manufacturing Technology by Rajkishore Nayak and Rajiv Padhye