Yaa Ten Points Organisation For Textile Inspection Inward Garment Manufacture

10 Points System for Fabric Inspection inwards Garment Industry

Mayedul Islam
Merchandiser at Fashion Xpress Buying House.
Badda, Dhaka, Bangladesh.
Email: mayedul.islam66@gmail.com

10 Points System
For production of high character garments, involve high character slice goods. It is an universal truth. When a sewing mill receives cloth from the mill, it is hard to deport a amount 100% inspection of the fabric. So together with thence minimum 10% inspection of all slice goods prior to spreading the fabric. There are several methods of cloth inspection inwards garments industry. Ten Points organization is 1 of them.

Fabric Inspection inwards Garment Industry

The x signal method is a signal per error system, which gives a measurable conduct to character grading per roll. In 1955s “Ten Points” slice goods evaluation was adapted yesteryear the Textile Distributors together with National Federation of Textiles. The organization assigns penalization points to each defect equally per next guideline.

Warp Defects

Size of defects →→→→→→→→→→→→→→Penalty

Up to 1 inch →→→→→→→→→→→→→1 Point
1 to five inches →→→→→→→→→→→→→3 Points
5 to x inches →→→→→→→→→→→→5 Points
x to 36 inches →→→→→→→→→→→10 Points

Filling/Weft Defects

Size of defects →→→→→→→→→→→→→Penalty

Up to 1 inch →→→→→→→→→→→→ 1 Point
1 to five inches →→→→→→→→→→→→3 Points
five inches to one-half the width →→→→→→5 Points
Half to Full width →→→→→→→→→→10 Points

A maximum x Points is charged for 1 linear yard of fabric.

Working Procedures

Under the x Points system, a slice is graded equally “First”, if the amount penalization points create non spill out the amount yardage of the piece.

In instance of a cloth wider than l inches; “First” character is considered if the amount defect points create non spill out the amount yardage of the fabric.