Diy Wall Mountain Side Table

Hey all! I am Caitlin, of The Merrythought, in addition to I am hence excited to hold upwards sharing a DIY amongst all of you lot hither on today! Lately I accept been working on updating my living room past times decluttering in addition to adding closed to useful but uncomplicated DIY projects. This i mightiness but hold upwards my favorite hence far!

What you'll need:
-Two pieces of hardwood (I used oak) 14" x vii 1/4" x 3/4" in addition to 14" x 1 1/4" x 3/4"
-Two minor pieces of plywood 2 3/8" x 1 7/8" x 3/16" in addition to vii 1/4" x 2 1/4" x 3/16"
-5 brusk screws (1 5/8")
-1 long screw (2 1/2")
-Miterbox saw
-Drill
-Stain
-Super glue/Wood glue

How to brand it:
-Use your saw to cutting both ends of the long, sparse slice of oak (which volition hold upwards the back upwards underneath) at 45 score angles.
-Stain all iv pieces of forest in addition to permit them dry out according to the directions of your stain.

-Attach the larger slice of plywood to the dorsum of the tabular array past times drilling ii holes through the plywood large plenty for the screw to instruct through in addition to hence business it upwards on the dorsum of the board in addition to drill ii airplane pilot holes inwards the dorsum of the oak in addition to hence screw the ii screws inwards identify through these holes.
-Drill ii holes through that plywood underneath where it is attached to the oak - these volition hold upwards where the screws instruct into the wall later.

-Use the mucilage to attach the smaller slice of plywood to the bottom of the angled forest in addition to hence drill a hole through both - where a screw volition instruct through into the wall later.
-Drill a hole through the pinnacle of the angled slice that is slightly wider in addition to hence your screw in addition to attach it to the bottom of your tabular array past times laying your table, amongst the pinnacle on the flooring in addition to dorsum side (the plywood) against a wall, middle your back upwards slice on the bottom of the tabular array pinnacle amongst the plywood slice sitting apartment against the wall, in addition to hence attach amongst a brusk screw.
-Now you lot tin post away role ii brusk screws through the large plywood to attach it to the wall in addition to the long screw to attach the bottom back upwards to the wall. Make certain your tabular array is flat earlier screwing it in.

Mine has already gotten a lot of role belongings my drinks in addition to snacks since this corner of the couch is my favorite topographic point for piece of cake nighttime blogging. Try it out. I promise you lot relish yours equally much equally I practise mine!

Caitlin is i of the iii minds behind The Merrythought. There they portion amongst you lot yummy recipes, inspiring DIY projects, fashionable clothes, lovely homes, pretty parties, in addition to bits of their household unit of measurement life.

Follow her:
Blog: http://themerrythought.com
Facebook: http://facebook.com/TheMerrythought
Pinterest: http://pinterest.com/themerrythought/
Instagram: http://instagram.com/caitlinsheree

Share this post